Overview
The Big Jack 2 HP 220 V submersible deep well pump is available in two configurations. Select Without control box or With control box from the dropdown.
- Stainless steel body with bronze discharge
- Built-in check valve
- Thermally protected, hermetically sealed motor
- Capacitor-start motor
- Submersible operation eliminates the need for priming
Without control box: Two wires plus ground; no external control box required.
With control box: Four-wire setup with an external control box included.
Specifications
| Specification | Without control box | With control box |
|---|---|---|
| Product type | Submersible deep well pump | Submersible deep well pump |
| Brand | BIG JACK | — |
| Power | 2 HP | 2 HP |
| Voltage | 220 V | 220 V |
| Current | 13.5 A | — |
| Phase | Single phase | Single phase |
| Frequency | 60 Hz | 60 Hz |
| Pump size | 4 in. | 4 in. |
| Maximum flow rate | 20 GPM | — |
| Maximum head | 312 ft (open-tank discharge) | — |
| Wiring | 2 wires plus ground | 4-wire setup |
| External control box | Not required | — |
| Body material | Stainless steel | Stainless steel |
| Discharge connection | 1¼ in. NPT | 1¼ in. NPT |
| Check valve | Built in | Built in |
| Power cord length | 10 ft | 10 ft |
| Motor protection | Thermal protection | Thermal protection |
| Motor starting | Capacitor start | Capacitor start |
| Discharge material | Bronze | Bronze |
| Intake | — | Mid intake |
| Control box | — | Included |
| Impellers, diffusers and intake screen | — | Thermoplastic |
A dash indicates a specification was not confirmed in that configuration's listing. Maximum flow and maximum head are separate operating limits. The 312 ft figure applies to the model without a control box, for discharge to an open tank. Refer to the performance chart for flow at the required head.
Package contents
- 2 HP submersible deep well pump in the selected configuration, with 10 ft power cord
- Installation tape and electrical tape kits
- With control box option: control box and installation user's manual