Overview
This 3 HP submersible deep well pump includes a control box and a stainless steel body for well-water pumping.
- Stainless steel body with bronze discharge
- Built-in check valve
- Thermally protected, hermetically sealed motor
- Thermoplastic impellers, diffusers and intake screen
- Capacitor-start motor
- Submersible operation eliminates the need for priming
Performance: Maximum flow and maximum head are separate operating limits. Flow decreases as head increases. The listed 625 ft maximum head is for discharge to an open tank; refer to the performance chart and pump selection guide for pressure-tank applications.
Specifications
| Product type | Submersible deep well pump |
|---|---|
| Power | 3 HP |
| Voltage | 220 V |
| Current | 17 A |
| Phase | Single phase |
| Frequency | 60 Hz |
| Pump size | 4 in. |
| Maximum flow rate | 35 GPM (listed at 1 ft head) |
| Maximum head | 625 ft (open-tank discharge) |
| Intake | Mid intake |
| Wiring | 4-wire setup |
| Control box | Included |
| Discharge connection | 1¼ in. NPT |
| Motor starting | Capacitor start |
| Body material | Stainless steel |
| Discharge material | Bronze |
| Check valve | Built in |
| Power cord length | 10 ft |
| Motor protection | Thermal protection |
| Impellers, diffusers and intake screen | Thermoplastic |
Package contents
- 3 HP submersible deep well pump with 10 ft power cord
- Control box
- Installation user’s manual
- Installation tape and electrical tape kits